FAQ

Fusion Mineral Paint

Jump to Specific Questions

Fusion™: The Original Mineral Paint

Fusion Mineral Paint is designed as an all-in-one furniture paint with strong adhesion, durable acrylic resins and a built-in top coat.

The Fusion™ Difference

The formula is created for straightforward DIY use, dependable coverage and professional-looking results with less product waste.

Environmentally conscious by design

Fusion products are formulated with low odour and without added lead, ammonia or formaldehyde.

Little to no prep work required

Most sound, previously finished surfaces only need a thorough cleaning and, when glossy, a light scuff sanding.

Built-in top coat

For most furniture projects, an additional top coat is optional rather than required.

Incredible coverage

Apply thin coats and allow each coat to dry. Coverage varies with the colour, surface and application method.

Highly durable formulation

Once fully cured, the finish is washable and suitable for everyday furniture, cabinetry and decorative projects.

Super-smooth matte finish

Use a quality synthetic brush or microfibre roller and avoid overworking paint as it begins to dry.

A broad colour collection

Use a painted colour card or fan deck to compare shades in the room where the finished piece will live.

Do I have to prep my furniture before painting?

Yes. At minimum, remove dust, grease and residue. Extra prep depends on the existing coating and condition of the surface.

What surfaces can I paint?

Fusion can be used on many properly prepared surfaces, including wood, metal, glass, laminate, melamine, brick and tile.

Can I paint over oil-based paint?

Clean the surface and lightly scuff glossy coatings before testing adhesion in an inconspicuous area.

How do I clean with TSP Alternative?

Dilute as directed, wash the full surface with clean cloths and allow it to dry before sanding or painting.

How do I test for wax residue?

Lightly sand or scrape a hidden area. Gumming on the abrasive or waxy buildup indicates that wax should be removed.

How do I remove wax?

Use an appropriate odourless solvent with clean cloths, working until the surface no longer feels waxy or transfers residue.

What is Odourless Solvent?

It is a highly refined mineral-spirit solvent used for removing wax, oily residue and certain adhesives before painting.

Do I have to sand my furniture?

Sanding is usually only needed to de-gloss shiny finishes, smooth damage or improve adhesion on difficult coatings.

Do I have to prime?

Most projects do not need primer. Use a stain-blocking primer for tannin bleed, knots or other discolouration.

How do I paint a light colour over a dark one?

Apply a suitable mid-tone transition layer first, then build the lighter colour with several thin coats.

What is bleed-through and how do I stop it?

Bleed-through is discolouration migrating from the substrate. Seal it with a compatible shellac-based stain-blocking primer.

Do I need Ultra Grip?

Use Ultra Grip only on especially slick or difficult surfaces after cleaning and testing the paint’s adhesion.

When do I need primer?

Prime when you must block stains or tannins, or when the substrate requires a specialized bonding or conversion primer.

How do I choose the right brush?

Match the brush size and shape to the project. Large flat areas need wider tools; details and profiles need smaller shaped brushes.

How do I avoid brush strokes?

Use less paint, apply thin coats, choose fine synthetic bristles and stop brushing once the paint begins to set.

How should I hold the brush?

Hold near the ferrule with a relaxed grip so the brush can glide rather than being pressed hard into the surface.

Synthetic or natural bristles?

Synthetic bristles generally create a smoother painted finish. Natural bristles hold more product and suit textured finishes, oils and waxes.

Which brush shape should I use?

Flat and angled brushes cover broad areas and cut edges; round, oval and sash brushes reach details, corners and spindles.

How do I care for my brush?

Do not allow paint to dry in the bristles. Clean promptly, condition when needed and dry the brush hanging or lying flat.

How do I clean my brush?

Rinse water-based paint with warm water and brush soap, working the cleaner through the bristles until the water runs clear.

How much area will the paint cover?

Coverage depends on the colour, substrate and application. Smooth sealed surfaces usually require less paint than porous or high-contrast surfaces.

How should I choose a colour?

Compare painted samples under the room’s natural and artificial lighting and beside flooring, fabrics and nearby finishes.

What is the difference between dry time and cure time?

Dry time is when the surface can accept another coat. Cure time is the longer period needed for the finish to reach maximum strength.

How long should I wait between coats?

Wait until the previous coat is dry and no longer lifts or drags when lightly brushed. Cool or humid conditions require more time.

How long after painting can I add a top coat?

Allow the paint to dry thoroughly. Water-based, oil-based and wax finishes each have different recommended wait times.

Why do colours have different consistencies?

Different mineral pigments change the weight, body and flow of each colour without indicating a quality problem.

Why do some colours need more coats?

Bright, pure colours and whites often contain less opaque pigments. Thin additional coats or a suitable base colour improve coverage.

Applying paint with a brush

Load only part of the bristle length, remove excess paint and work from one end of the surface to the other in thin coats.

Rolling the paint

Use a fine microfibre roller, remove excess paint in the tray and roll with light pressure in one consistent direction.

What temperature is best for painting?

Avoid extreme heat, cold, strong wind and high humidity. Paint in a stable, well-ventilated environment.

In what order should paint and finishes be applied?

As a general layering rule, use water-based products first, oil-based finishes next and wax last.

Distressing overview

Distressing removes paint from edges and natural wear points to create an aged finish. Work before the paint becomes fully cured.

Using a Beeswax Distressing Block

Rub wax where you want the upper paint layer to release, paint over it and lightly sand those areas after drying.

Wet sanding and distressing

Mist the dry paint and use a fine wet-sanding pad with gentle circular motions, increasing pressure only where more wear is desired.

Do I need a top coat over Fusion Mineral Paint?

Usually no. Add one when you want a different sheen, decorative effect or extra protection in frequently washed areas.

What is the best top coat over dark colours?

Oil-based finishes and clear waxes can enrich dark colours. Apply water-based coatings very thinly to avoid cloudiness.

What is the best top coat over whites?

Choose a clear, non-yellowing water-based top coat and test it over the exact paint and substrate before finishing the full project.

Which high-traffic areas may need extra protection?

Tabletops, floors and cabinetry may benefit from added protection, while low-contact furniture often needs no additional coat.

What is Stain & Finishing Oil?

It is an oil-based stain-and-finish system for bare wood and compatible painted effects. Excess product must be wiped away evenly.

Can I paint over Hemp Oil?

Only attempt this after the oil is fully cured and the surface has been thoroughly cleaned and tested for adhesion.

Wax versus oil or gel finishes

Wax suits lower-contact decorative pieces. Harder oil or gel finishes are better where water resistance and frequent cleaning matter.

How do I use Gel Stain & Top Coat?

Mix thoroughly, test first and apply controlled coats. Unlike penetrating stains, it is built up as a film-forming finish.

How do I clean wax or oil from brushes?

Work an appropriate solvent through the bristles, wipe away residue and repeat until the brush is clean.

Can I apply Hemp Oil over paint?

It can slightly deepen colour and increase sheen, but it must be applied sparingly and all excess must be removed.

Can Tough Coat be used over bare wood?

Yes. Apply thin coats and lightly sand raised grain between coats when needed.

Can I apply wax over Tough Coat?

Yes. Wax should be the final layer and is mainly used to adjust sheen or create decorative effects.

How do I get an ultra-smooth finish?

Allow the paint to dry, then use a very fine wet-sanding pad with light pressure before wiping the surface clean.

Which finishes are suitable for food-contact wood?

Use only products specifically labelled for the intended food-contact application and follow their full cure instructions.

How should I clean a finished piece?

Use a soft cloth with mild soap and water. Avoid aggressive cleaners, abrasives and prolonged standing water.

What is Tung Oil used for?

Tung oil is used on suitable bare wood and certain exterior applications. Apply thin coats and remove excess according to the product directions.

Why can top coats yellow over white paint?

Wood tannins, environmental exposure and some oil-based finishes can warm or yellow pale colours. Test the full finishing system first.

How do I clean and care for painted surfaces?

Use a soft damp cloth and mild soap after the finish has cured. Avoid harsh chemicals and abrasive scrubbing.

How do I maintain different Fusion finishes?

Dry-dust waxed pieces and gently damp-clean harder oil, gel and water-based finishes according to their care instructions.

How do I keep an upcycled piece looking good?

Start with proper prep, allow full cure time and address spills or wear early with gentle cleaning and small touch-ups.

How do I paint a front door?

Clean thoroughly, scuff glossy surfaces, use thin coats and paint only in suitable weather with enough drying time.

Can I paint kitchen cabinets?

Yes. Degreasing and careful prep are essential. Remove contamination, label doors and hardware, and allow the finish to cure before heavy use.

Can I paint a fireplace?

Brick, stone and wood surrounds can be painted when they remain within the product’s safe temperature and use limitations.

Can I paint floors?

Many DIYers paint floors successfully, but assess wear, moisture and maintenance expectations before choosing the full coating system.

Can I paint tile?

Some tile can be painted after deep cleaning, abrasion and an adhesion test. Avoid areas exposed to constant water or standing moisture.

Can I paint fabric?

Test tightly woven fabric first, use thin diluted coats and sand lightly between coats to reduce stiffness.

Can I paint leather or vinyl?

Clean and test a hidden area because some vinyl compounds can remain tacky or react with coatings.

Can I paint countertops?

Paint is not recommended where water sits for long periods or where the surface is used for direct food preparation.

Can I paint metal?

Remove grease and rust, use a rust-inhibiting primer where required and test adhesion before completing the project.

Can I use Fusion outdoors?

Use it on properly prepared, dry surfaces and coat all exposed sides of wood so moisture cannot easily enter the substrate.

No answers found

Try a different word or clear the search.